Boot Options
164
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
5.12 Service Management Tasks
This section describes system administration commands.
5.12.1 System Administration Commands
Use the following administrative commands to perform management tasks.
CLI Syntax: ALU-1# admin
display-config
reboot [active | standby | upgrade] [now]
save [file-url] [detail] [index]
5.12.1.1 Viewing the Current Configuration
Use the following CLI command to display the current configuration. The detail
option displays all default values. The index option displays only the persistent
indexes.
CLI Syntax: admin# display-config [detail | index]
The following displays an example of a configuration file:
A:ALU-1# admin display-config
# TiMOS-B-0.0.R3 both/hops NOKIA SAR 7705
# Copyright (c) 2016 Nokia.
# All rights reserved. All use subject to applicable license agreements.
# Built on Wed Jan 16 01:05:13 EST 2016 by csabuild in /rel0.0/I297/panos/main
# Generated THU JAN 17 21:21:21 2016 UTC
exit all
configure
#--------------------------------------------------
echo "System Configuration"
#--------------------------------------------------
system
name "ALU-1"
exit
login-control
idle-timeout disable
pre-login-message "CSAxxx - 7705" name
exit
time
sntp
server-address 128.120.118.37 preferred
To Next Page
Loading...
