CLI Usage
26
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
3.2.3 CLI Environment Commands
The CLI environment commands are found in the root>environment context of the
CLI tree. These commands control session preferences for a single CLI session. The
CLI environment commands are listed in Table 4.
3.2.4 CLI Monitor Commands
The CLI monitor commands are found in the root>monitor context of the CLI tree.
Monitor commands display specified statistical information related to the monitor
subject (such as filter, port, router, and service) at a configurable interval until a count
is reached.
The monitor command output displays a snapshot of the current statistics. The
output display refreshes with subsequent statistical information at each configured
interval and is displayed as a delta to the previous display.
Table 4 CLI Environment Commands
Command Description
alias Enables the substitution of a command line by an alias
create Enables or disables the use of a create parameter check
more Configures whether CLI output should be displayed one screen at
a time awaiting user input to continue
reduced-prompt Configures the maximum number of higher-level CLI context nodes
to display by name in the CLI prompt for the current CLI session
saved-ind-prompt Saves the indicator in the prompt
suggest-internal-
objects
Enables the suggestion of internally created objects while auto-
completing
terminal Configures the terminal screen length for the current CLI session
time-display Specifies whether time should be displayed in local time or UTC
time-stamp Specifies whether a timestamp should be displayed before the
prompt
To Next Page
Loading...
