Basic System Configuration Guide CLI Usage
Edition: 01 3HE 11010 AAAC TQZZA 71
length
Syntax length lines
Context environment>terminal
Description This command sets the terminal screen length (number of lines).
Default 24 — terminal dimensions are set to 24 lines long by 80 characters wide
Parameters lines — the number of lines for the terminal screen length
Values 1 to 512
width
Syntax width width
Context environment>terminal
Description This command sets the terminal screen width (number of characters).
Default 80 — terminal dimensions are set to 24 lines long by 80 characters wide
Parameters width — the number of characters for the terminal screen width
Values 1 to 512
time-display
Syntax time-display {local | utc}
Context environment
Description This command displays timestamps in the CLI session based on local time or Coordinated
Universal Time (UTC).
The system keeps time internally in UTC and is capable of displaying the time in either UTC
or local time based on the time zone configured.
This configuration command is only valid for times displayed in the current CLI session. This
includes displays of event logs, traps and all other places where a timestamp is displayed.
In general, all timestamps are shown in the time selected. This includes log entries destined
for console/session, memory, or SNMP logs. Log files on compact flash are maintained and
displayed in UTC format.
Default time-display local
To Next Page
Loading...
