Nokia 7705 Configuration Guide

Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 309
6.10.6.6 Other Editing Commands
Other editing commands include:
• commit — saves changes made to the timing references during a session
Modifications are not persistent across system boots unless this command is
entered.
• abort — discards changes that have been made to the timing references during
a session
CLI Syntax: config>system>sync-if-timing
abort
commit
6.10.6.7 Forcing a Specific Reference
You can force the system synchronous timing output to use a specific reference.
When the command is executed, the current system synchronous timing output is
immediately referenced from the specified reference input. If the specified input is not
available (shut down), or in a disqualified state, the timing output will enter a holdover
state based on the previous input reference.
Debug configurations are not saved between reboots.
CLI Syntax: debug>sync-if-timing
force-reference {external | ref1 | ref2}
Example: debug>sync-if-timing# force-reference
Note: The debug sync-if-timing force-reference command should only be used to test
and debug problems. Once the system timing reference input has been forced, it will not
revert back to another reference unless explicitly reconfigured.

Nokia 7705 Specifications

General

Brand	Nokia
Model	7705
Category	Network Router
Language	English