Basic System Configuration Guide CLI Usage
Edition: 01 3HE 11010 AAAC TQZZA 27
The <Ctrl-c> keystroke interrupts a monitoring process. Monitor command
configurations cannot be saved. You must enter the command for each monitoring
session. If the maximum limits are configured, you can monitor the statistical
information for a maximum of 60 × 999 s (approximately 1000 minutes, or 16.6
hours).
The CLI monitor commands are listed in Table 5.
Table 5 CLI Monitor Commands
Command Description
filter Enables IP and MAC filter monitoring at a configurable
interval until that count is reached
management-access-filter Monitors commands for management access filters
port Enables port traffic monitoring. The specified ports’
statistical information displays at the configured interval
until the configured count is reached.
router Enables virtual router instance monitoring at a
configurable interval until that count is reached
service Monitors commands for a particular service
To Next Page
Loading...
