Basic System Configuration Guide CLI Usage
Edition: 01 3HE 11010 AAAC TQZZA 77
ipv6
Syntax ipv6 entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>management-access-filter
Description This command enables IPv6 filter monitoring. The statistical information for the specified IPv6
filter entry is displayed at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified IPv6 filter. The
subsequent statistical information listed for each interval is displayed as a delta to the
previous screen output.
When the keyword rate is specified, the rate per second for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands, but only statistical information is
displayed. Monitor commands display the selected statistics according to the configured
number of times at the interval specified.
Parameters entry-id — displays information for the specified filter entry ID
Values 1 to 9999
seconds — configures the interval for each display in seconds
Values 3 to 60
Default 10
repeat — configures how many times the command is repeated
Values 1 to 999
Default 10
absolute — displays raw statistics, without processing. No calculations are performed
on the delta or rate statistics.
rate — displays the rate per second for each statistic instead of the delta
port
Syntax port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command enables port traffic monitoring. The specified ports’ statistical information is
displayed at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified ports. The subsequent
statistical information listed for each interval is displayed as a delta to the previous screen
output.
To Next Page
Loading...
