Boot Options
174
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
Command usage:
• bof save — saves the BOF to the default drive (cf3:) associated with the active CSM
(either in slot A or B)
• bof save cf3: — saves the BOF to cf3: associated with the active CSM (either in slot A
or B)
To save the BOF to a compact flash drive associated with the standby CSM (for example, the
redundant (standby) CSM is installed in slot B), specify the -A or -B option.
Command usage:
• bof save cf3-A: — saves the BOF to cf3: associated with the CSM in slot A whether it
is active or standby
• bof save cf3-B: — saves the BOF to cf3: associated with the CSM in slot B whether it
is active or standby
The slot name is not case-sensitive. You can use uppercase or lowercase “A” or “B”.
The bof save and show bof commands allow you to save to or read from the compact flash
of the standby CSM. Use the show card command to determine the active and standby CSM
(A or B).
Default saves must be explicitly executed; the BOF is saved to cf3: if a location is not specified
Parameters cflash-id — the compact flash ID where the bof.cfg is to be saved (see Table 14 for
parameter descriptions and values)
To Next Page
Loading...
