Boot Options
180
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
tertiary-config
Syntax tertiary-config file-url
no tertiary-config
Context bof
Description This command specifies the name and location of the tertiary configuration file.
The system attempts to use the configuration specified in tertiary-config if both the primary
and secondary config files cannot be located. If this file cannot be located, the system boots
with the factory default configuration.
If an error in the configuration file is encountered, the boot process aborts.
The no form of the command removes the tertiary-config configuration.
Default n/a
Parameters file-url — the tertiary configuration file location (see Table 14 for parameter descriptions)
tertiary-image
Syntax tertiary-image file-url
no tertiary-image
Context bof
Description This command specifies the tertiary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If
this fails, the system attempts to load the runtime images from the location configured in the
secondary-image. If the secondary image load fails, the tertiary image specified in tertiary-
image is used.
All runtime image files (both.tim) must be located in the same directory.
The no form of the command removes the tertiary-image configuration.
Default n/a
Parameters file-url — the file-url can either be local (this CSM) or a remote FTP server (see Table 14
for parameter descriptions)
To Next Page
Loading...
