Basic System Configuration Guide Boot Options
Edition: 01 3HE 11010 AAAC TQZZA 191
boot-messages
Syntax boot-messages
Context show
Description This command displays boot messages generated during the last system boot.
Output The following output is an example of boot messages.
Output Example
A:ALU-1# show boot-messages
===============================================================================
cf3:/bootlog.txt
===============================================================================
Boot log started on CPU#0
Build: X-2.1.R1 on Tue Apr 1 16:25:56 EDT 2016 by csabuild
Total Memory: 992MB Chassis Type: sar8 Card Type: corona_r1
TiMOS-L-2.1.R1 boot/hops NOKIA SAR 7705
Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Apr 9 09:36:02 EDT 2016 by csabuild in /rel2.0/b1/R1/panos/main
TiMOS BOOT LOADER
Time from clock is FRI APR 11 13:31:16 2016 UTC
Switching serial output to sync mode...
Total Memory: 992MB Chassis Type: sar8 Card Type: corona_r1
TiMOS-B-2.1.R1 both/hops NOKIA SAR 7705
Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Apr 9 09:53:01 EDT 2016 by csabuild in /rel2.0/b1/R1/panos/main
wait The time configured for the boot to pause while waiting for console
input
persist Indicates whether the system will preserve system indexes when
a save command is executed
fips-140-2 Indicates whether FIPS-140-2 is enabled on the node
console speed The console port baud rate
Table 22 Show BOF Output Fields (Continued)
Label Description
To Next Page
Loading...
