System Management
278
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
6.10.1.2.2 Summer Time Conditions
The dst-zone command configures the start and end dates and offset for summer
time or daylight savings time to override system defaults or for user-defined time
zones.
When configured, the time will be adjusted by adding the configured offset when
summer time starts and subtracting the configured offset when summer time ends.
CLI Syntax: config>system>time
dst-zone zone-name
end {end-week} {end-day} {end-month}
[hours-minutes]
offset offset
start {start-week} {start-day} {start-month}
[hours-minutes]
CST Central Standard Time UTC -6 hours
CDT Central Daylight Saving Time UTC -5 hours
MST Mountain Standard Time UTC -7 hours
MDT Mountain Daylight Saving Time UTC -6 hours
PST Pacific Standard Time UTC -8 hours
PDT Pacific Daylight Saving Time UTC -7 hours
HST Hawaiian Standard Time UTC -10 hours
AKST Alaska Standard Time UTC -9 hours
AKDT Alaska Standard Daylight Saving
Time
UTC -8 hours
Australia and New Zealand:
AWST Western Standard Time UTC +8 hours
ACST Central Standard Time UTC +9.5 hours
AEST Eastern Standard/Summer Time UTC +10 hours
NZT New Zealand Standard Time UTC +12 hours
NZDT New Zealand Daylight Saving Time UTC +13 hours
Table 32 System-defined Time Zones (Continued)
Acronym Time Zone Name UTC Offset
To Next Page
Loading...
