Nokia 7705 - Page 304

System Management
304
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
priority1 priority-value
priority2 priority-value
profile ieee1588-20008
ptp-port port-id
anno-rx-timeout number-of-timeouts
log-anno-interval log-anno-interval
log-sync-interval log-sync-interval
peer peer-id ip-address ip-address
[no] shutdown
unicast-negotiate
[no] shutdown
source-interface ip-if-name
CLI Syntax: config>system>sync-if-timing
ref1
source-ptp-clock clock-id
ref2
source-ptp-clock clock-id
The following example shows the command usage:
Example: config>system# ptp clock 1 create
config>system>ptp>clock# clock-type ordinary slave
config>system>ptp>clock# source-interface ptp-loop
config>system>ptp>clock# clock-mda 1/2
config>system>ptp>clock# domain 0
config>system>ptp>clock# no dynamic-peers
config>system>ptp>clock# priority1 128
config>system>ptp>clock# priority2 128
config>system>ptp>clock# profile ieee1588-2008
config>system>ptp>clock# ptp-port 1
config>system>ptp>clock>ptp-port# anno-rx-timeout 3
config>system>ptp>clock>ptp-port# log-anno-interval 1
config>system>ptp>clock>ptp-port# log-sync-interval -6
config>system>ptp>clock>ptp-port# unicast-negotiate
config>system>ptp>clock>ptp-port# peer 1
config>system>ptp>clock>ptp-port>peer# description "Peer
to Boundary Clock"
config>system>ptp>clock>ptp-port>peer# ip-address
10.222.222.10
config>system>ptp>clock>ptp-port>peer# exit
config>system>ptp>clock>ptp-port# peer 2
config>system>ptp>clock>ptp-port>peer# description ToGM
config>system>ptp>clock>ptp-port>peer# ip-address
192.168.2.10
config>system>ptp>clock>ptp-port>peer# exit
config>system>ptp>clock>ptp-port# no shutdown
config>system>ptp>clock>ptp-port# exit
config>system>ptp>clock# no shutdown