System Management
354
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
start-month — the starting month of the year when the summer time will take effect
Values january, february, march, april, may, june, july, august, september,
october, november, december
Default january
hours — specifies the hour at which the summer time will take effect
Default 0
minutes — specifies the number of minutes, after the hours defined by the hours
parameter, when the summer time will take effect
Default 0
gnss
Syntax gnss
Context config>system>time
Description This command enables the context to create or modify gnss parameters for time.
Default n/a
port
Syntax port port-id time-ref-priority priority-value
no port
Context config>system>time>gnss
Description This command specifies a GNSS receiver port as a synchronous timing source. The specific
GNSS receiver port is identified by port-id and has an assigned priority-value.
Default no port
Parameters port-id — identifies the GNSS receiver port in the slot/mda/port format
priority-value — specifies the priority order of the given GNSS receiver port configured
as the time reference. The lower the number, the higher the priority. GNSS should
be given the highest priority whenever available.
Values 1 to 16
To Next Page
Loading...
