System Management
404
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
save
Syntax save [file-url] [detail] [index]
Context admin
Description This command saves the running configuration to a configuration file. For example:
ALU-1>admin# save ftp://test:test@192.168.x.xx/./100.cfg
Saving configuration .........Completed.
By default, the running configuration is saved to the primary configuration file.
Parameters file-url — the file URL location to save the configuration file (see Table 14 for parameter
descriptions)
Default the primary configuration file location
detail — saves both default and non-default configuration parameters
Default saves non-default configuration parameters
index — forces a save of the persistent index file regardless of the persistent status in
the BOF file. The index option can also be used to avoid an additional boot required
while changing your system to use the persistence indexes.
enable-tech
Syntax [no] enable-tech
Context admin
Description This command enables the shell and kernel commands.
tech-support
Syntax tech-support file-url
Context admin
Description This command creates a system core dump.
If the file-url is omitted, and a ts-location has previously been defined, the tech-support file
will get an automatic 7705 SAR generated filename based on the system name, date, and
time, and the file will be saved to the directory indicated by the configured ts-location.
Note: This command should only be used with authorized direction from the Nokia
Technical Assistance Center (TAC).
To Next Page
Loading...
