Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 407
6.13.2.2.2 High Availability (Redundancy) Commands
redundancy
Syntax redundancy
Context admin
config
Description This command enters the context to allow the user to perform redundancy operations.
force-switchover
Syntax force-switchover [now]
Context admin>redundancy
Description This command forces a switchover to the standby CSM card. The primary CSM reloads its
software image and becomes the secondary CSM.
Parameters now — forces the switchover to the redundant CSM card immediately
switchover-exec
Syntax switchover-exec file-url
no switchover-exec
Context config>system
Description This command specifies the location and name of the CLI script file executed following a
redundancy switchover from the previously active CSM card. A switchover can happen
because of a fatal failure or by manual action.
The CLI script file can contain commands for environment settings, debug settings, and other
commands not maintained by the configuration redundancy.
When the file-url parameter is not specified, no CLI script file is executed.
Default n/a
Parameters file-url — specifies the location and name of the CLI script file (see Table 14 for
parameter descriptions)
To Next Page
Loading...
