Nokia 7705 - Page 481

Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 481
http-connections
Syntax http-connections [host-ip-address/mask]
no http-connections
Context debug>system
Description This command displays HTTP connections debug information.
Parameters host-ip-address/mask — displays information for the specified host IP address and mask
ntp
Syntax ntp router router-name interface ip-int-name
no ntp
Context debug>system
Description This command enables and configures debugging for NTP.
The no form of the command disables debugging for NTP.
Parameters router-name — specifies the route name, either base or management
Default base
ip-int-name — maximum 32 characters; must begin with a letter. If the string contains
special characters (#, $, spaces, etc.), the entire string must be enclosed within
double quotes.
lag
Syntax lag [lag-id lag-id [port port-id]] [all]
lag [lag-id lag-id [port port-id]] [sm] [pkt] [cfg] [red] [iom-upd] [port-state] [timers] [sel-
logic] [mc] [mc-pkt]
no lag [lag-id lag-id]
Context debug
Description This command enables debugging for a LAG.
The no form of the command disables debugging for a LAG.
Parameters lag-id — specifies the LAG identifier, expressed as a decimal integer
Values 1 to 32
port-id — specifies the physical port ID in the slot/mda/port format
all — traces all LAG and LACP parameters