System Management
484
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
sync-if-timing
Syntax sync-if-timing {external | ref1 | ref2}
Context clear>system
Description This command allows an operator to individually clear (re-enable) a previously failed
reference. As long as the reference is one of the valid options, this command is always
executed. An inherent behavior enables the revertive mode which causes a re-evaluation of
all available references.
Parameters external — clears the third timing reference
ref1 — clears the first timing reference
ref2 — clears the second timing reference
trace
Syntax trace log
Context clear
Description This command allows an operator to clear the trace log.
To Next Page
Loading...
