Basic System Configuration Guide CLI Usage
Edition: 01 3HE 11010 AAAC TQZZA 53
There are two ways to verify that a user is in the enable-admin mode:
• show users – administrator can learn which users are in this mode
• enter the enable-admin command again at the root prompt and an error message will
be returned
A:ALU-1# show users
===============================================================================
User Type Login time Idle time
From
===============================================================================
admin Console -- 0d 19:42:22
--
admin Telnet 08APR2008 08:35:23 0d 00:00:00
138.120.141.147
-------------------------------------------------------------------------------
Number of users : 2
===============================================================================
A:ALU-1#
A:ALU-1# enable-admin
MINOR: CLI Already in admin mode.
A:ALU-1#
back
Syntax back
Context <global>
Description This command moves the context back one level of the command hierarchy. For example, if
the current level is the config router mpls context, the back command moves the cursor to
the config router context level.
clear
Syntax clear
Context <global>
Description This command clears statistics for a specified entity or clears and resets the entity.
Parameters card — reinitializes an I/O module in a specified slot
cpm-filter — clears CPM filter
cron — clears CRON history
eth-cfm — clears ETH-CFM parameters
external-alarms — accesses external alarms-related clear commands
filter — clears IP filter counters
To Next Page
Loading...
