Nokia 7705 - Page 62

CLI Usage
62
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
requests — the number of ping requests to send to the remote host, expressed as a
decimal integer
Values 1 to 10000
Default 5
do-not-fragment — specifies that the request frame should not be fragmented. This
option is particularly useful in combination with the size parameter for maximum MTU
determination.
router-instance — specifies the router name or service ID
Values router-name: Base, management
service-id: 1 to 2147483647
Default Base
service-name — specifies the service name, 64 characters maximum
timeout — specifies the timeout in seconds
Values 1 to 10
Default 5
fc-name — specifies the forwarding class
Values be | l2 | af | l1 | h2 | ef | h1 | nc
Default nc
pwc
Syntax pwc [previous]
Context <global>
Description This command displays the present or previous working context of the CLI session.
The pwc command provides a user who is in the process of dynamically configuring a
chassis a way to display the current or previous working context of the CLI session. The pwc
command displays a list of the CLI nodes that hierarchically define the current context of the
CLI instance of the user.
For example:
A:ALU>config>router>mpls# pwc
----------------------------------------------
Present Working Context :
----------------------------------------------
<root>
configure
router “Base”
mpls
----------------------------------------------
A:ALU>config>router>mpls#