Nokia 7705 - Page 64

CLI Usage
64
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
user: user name, 32 characters maximum
hostname: [dns-name | ipv4-address | ipv6-address]
dns-name: 128 characters maximum
ipv4-address: a.b.c.d
ipv6-address: x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0..FFFF]H
d: [0..255]D
interface: interface name, 32 characters
maximum, mandatory for link local
addresses
-l username — the user name to use when opening the SSH session
-v ssh-version — the version of the SSH session to use
Values 1, 2, or 1-2 (for SSH-1 only, SSH-2 only, or SSH-1 and SSH-2)
router-instance — the router name or service ID
Values router-name: Base, management
service-id: 1 to 2147483647
Default Base
service-name — specifies the service name, 64 characters maximum
telnet
Syntax telnet [ip-address | dns-name] [port] [router router-instance]
telnet [ip-address | dns-name] [port] [service-name service-name]
Context <global>
Description This command opens a Telnet session to a remote host.
Telnet servers in 7705 SAR networks limit a Telnet client to three retries to log in. The Telnet
server disconnects the Telnet client session after three retries. The number of retry attempts
for a Telnet client session is not user-configurable.
Parameters ip-address — the IP address of the remote host
Values ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0 to FFFF]H
d: [0 to 255]D
interface — 32 chars max, mandatory
for link local addresses