CLI Usage
66
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
milliseconds — the time in milliseconds to wait for a response to a probe, expressed as
a decimal integer
Values 1 to 60000
Default 5000
no-dns — when the no-dns keyword is specified, a DNS lookup for the specified host
name will not be performed
Default DNS lookups are performed
source ip-address — the source IP address to use as the source of the probe packets.
If the IP address is not one of the device’s interfaces, an error is returned.
Values ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
type-of-service — the type-of-service (TOS) bits in the IP header of the probe packets,
expressed as a decimal integer
Values 0 to 255
router-instance — the router name or service ID
Values router-name: Base, management
service-id: 1 to 2147483647
Default Base
service-name — specifies the service name, 64 characters maximum
tree
Syntax tree [detail] [flat]
Context <global>
Description This command displays the command hierarchy structure from the present working context.
Parameters detail — includes parameter information for each command displayed in the tree output
flat — displays the command hierarchy on single lines
write
Syntax write {user | broadcast} message-string
Context <global>
To Next Page
Loading...
