CLI Usage
90
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
port-id — specifies the physical port ID in the slot/mda/port format
If the card in the slot has an adapter card installed, the port-id must be in the
slot_number/MDA_number/port_number format. For example, 1/2/3 specifies port 3
on MDA 2 in slot 1.
The port-id must reference a valid port type. When the port-id parameter represents
TDM channels, the port ID must include the channel ID. A period “.” separates the
physical port from the channel-id. The port must be configured as an access port.
bridge-id — specifies an existing bridge that has been configured on an Integrated
Services card in the slot/mda/<bridge-id.branch-id> format
bridge-id value range: 1 to 16
branch-id — specifies an existing branch that has been configured on an Integrated
Services card in the slot/mda/<bridge-id.branch-id> format
branch-id value range: 1 to 32
bundle-id — specifies the multilink (PPP or IMA) bundle identifier. The bundle keyword
must be entered at the beginning of the parameter. The command syntax must be
configured as follows:
bundle-id: bundle-type-slot/mda.bundle-num
type: ima, ppp
bundle-num: 1 to 32
For example:
*A:ALU-12>config# port bundle-ppp-xz5/1.1
*A:ALU-12>config>port# multilink-bundle
aps-id aps-group-id[.channel]
aps keyword
group-id 1 to 24
mw-link-id mw-link-id
id 1 to 24
lag-id lag-id
lag keyword
id 1 to 32
qtag1 *, 0 to 4094
qtag2 *, 0 to 4094
vpi NNI 0 to 4095
UNI 0 to 255
vci 1, 2, 5 to 65535
dlci 16 to 1022
tunnel-id tunnel-id.[private | public]:tag
tunnel keyword
id 1 to 16 (1 is the only valid value)
tag 0 to 4094
To Next Page
Loading...
