Beacon G6 unit data sheet
Beacon G6 general description
Port forwarding support
The Beacon G6 supports the port forwarding of objects via TR-069:
• Application Name
• WAN Port
• LAN Port
• Internal Client
• Protocol
• Enable Mapping
• WAN Connection List
These are the same port forwarding parameters supported in the GUI.
Object support for WiFi parameters
The Beacon G6 supports the status retrieval and configuration of the following Wi-Fi parameters via
TR-069:
• Channel
• SSID
• Password for WPA and WEP
• Tx power (transmission rate in percentage of maximum transmit power)
• WPS
These are the same TR-069 object parameters that are supported in the GUI.
Statistics and troubleshooting support
The Beacon G6 supports TR-069 statistics and troubleshooting for LAN, WAN, and WiFi.
5.3.2 TR69 authentication using TLS and CA certificates
Beacon G6 supports TLS, as well as ACS authentication using SHA-256 pre-installed certificates.
If the URL is set to the https://... format, by default, the connection will use TLS without
authentication mode. The Beacon G6 can also authenticate the ACS using a pre-installed CA
certificate.
These devices support TLSv1.3 for TR069. The Beacon G6 supports download certification from
ACS.
5.3.3 TR-111 support
The Beacon G6 supports TR-111, which extends the WAN Management Protocol defined in TR-069
to enhance the ability to remotely manage LAN devices.
The device-gateway association enables an ACS to identify the associated gateway through which
a device is connected.
A connect request via the NAT gateway enables an ACS to initiate a TR-069 session with a device
that is operating behind a NAT gateway.
Use subject to agreed restrictions on disclosure and use.
42 3FE-49949-AAAA-TCZZA
To Next Page
Loading...
