Page 148 of 206 Troubleshooting
553-3001-304 Standard 3.00 September 2004
LD 32 STAT command
The wireless handsets are shown REGISTERED in the standby and active
modes. In the following example, “61 0” is an IP Phone 2004 and “62 2” is a
WLAN Handset 2211 in the standby mode.
.stat 61 0
IDLE REGISTERED 00
.stat 62 2
IDLE REGISTERED 00
LD 117 Inventory command
In the inventory report, the wireless handsets have a specific release code and
NT code, similar to the IDU command output. In the following example, “61
0” is an IP Phone 2004 and “62 2” is a WLAN Handset 2211.
=> inv prt sets
Set inventory:
17 10 2003 8 17 21, 17 10 2003 8 17 22, 6
i2004, 61 00, i2004 NT2K00GI 66 0 7641C7, I2004 , 6000
i2004, 62 02, i2004 NTTQ5010 66 7 017E47, I2211 , 6502
To Next Page
Loading...
