Nortel 2245 - Freeing the Serial Port for Administrative Purposes

Page 194 of 206 Appendix A: WLAN Application Gateway 2246
553-3001-304 Standard 3.00 September 2004
Freeing the serial port for administrative purposes
If the serial port is being used as the primary communication link with the
Application Server, it is necessary to enter the OAI command to free the serial
port to allow it to be used for administrative purposes, such as changing the
IP address of the WLAN Application Gateway 2246.
To free the serial port to allow it to be used for administrative purposes,
follow the steps in Procedure 18 on page 162.
20
21
22
23
24
25
26
27
28
29
30
Table 24
WLAN Handset 2210/2211 Planning Worksheet (Part 2 of 2)
OAI
Port
MAC Address User Name
Dialing
Ext.
IP Address (if static)