Nortel 2245 - Task Summary List; Configuring the OAI Box

Page 166 of 206 Appendix A: WLAN Application Gateway 2246
553-3001-304 Standard 3.00 September 2004
Task summary list
Complete the following tasks to configure the WLAN Application Gateway
2246:
1 Establish the system type from the OAI Box Configuration
option. See
“Configuring the OAI Box” on page 166.
2 Establish the Network settings from the Network Configuration
option.
See “Configuring network parameters” on page 168.
3 Configure the WLAN Handsets 2210/2211 from the Telephone Line
Configuration
option. See “Configuring the Telephone Line” on
page 175.
4 Configure the function sequence that activates the application from the
Feature Programming
option. See “Programming a feature” on
page 179.
Configuring the OAI Box
Follow the steps in Procedure 19 to configure the system type.
Procedure 19
Configure the system type from the OAI Box configuration option
1 From the NetLink OAI System
screen, select OAI Box Configuration.
The OAI Box Configuration screen displays. See Figure 24.