Appendix A: WLAN Application Gateway 2246 Page 177 of 206
WLAN IP Telephony Installation and Configuration
button. The MAC address appears on the first line of the wireless
handset display (12 characters). The MAC address must be
manually entered by typing the entire address, including digits and
colons.
• Name – enter the user name assigned to the wireless handset. This
is for record keeping only; it does not communicate the name to the
Call Server or the WLAN Handset 2210/2211.
• Extension – enter the extension number assigned to the WLAN
Handset 2210/2211. This is for record keeping only; it does not
communicate the extension number to the Call Server or the WLAN
Handset 2210/2211.
4 Write the MAC address on the Wireless Handset Planning Worksheet.
See “Planning Worksheet for WLAN Handsets 2210/2211” on page 193.
5 Repeat step 4, step 5, and step 6 for each wireless handset to be added
or changed.
6 Press Esc to return to the NetLink OAI System screen.
End of Procedure
Deleting a WLAN Handset 2210/2211
Follow the steps in Procedure 24 to delete a WLAN IP Telephony Manager.
Procedure 24
Deleting a WLAN Handset 2210/2211
Perform the following steps to delete a WLAN Handset 2210/2211.
1 From the NetLink OAI System screen, select Telephone Line
Configuration and press Enter.
The Telephone Line Configuration screen displays.
2 Use the arrow keys to highlight the line to be deleted.
3 Press D to delete the WLAN Handset 2210/2211 information.
4 Press Y to accept changes.
5 Press Esc to return to the NetLink OAI System screen.
End of Procedure
To Next Page
Loading...
