Troubleshooting Page 129 of 206
WLAN IP Telephony Installation and Configuration
• Network Status – displays information about the Ethernet network to
which the WLAN IP Telephony Manager 2245 is connected.
• Software Versions – lists the software versions for the WLAN IP
Telephony Manager 2245.
Error Status screen
The Error Status screen displays any alarms that indicate some system
malfunction. Some of these alarms are easily remedied. Others require a call
to Nortel Networks Technical Support.
From the System Status Menu screen, select Error Status. The Error
Status screen displays active alarms on the WLAN IP Telephony Manager
2245. Table 18 lists the alarms and the actions required to eliminate the alarm.
Press C to clear all clearable alarms.
Network Status screen
The WLAN IP Telephony Manager 2245 is connected to the Ethernet
network (LAN). The information about that connection is provided on the
Network Status screen. The screen displays information about the Ethernet
network. This information can help troubleshoot network problems.
Table 18
WLAN IP Telephony Manager 2245 active alarms and actions
Alarm text Action
Maximum payload usage reached Reduce usage, clear alarm
Maximum telephone usage reached Reduce usage, clear alarm
Maximum Access Point usage reached Reduce usage, clear alarm
Maximum call usage reached Reduce usage, clear alarm
SRP audio delayed Reduce usage, clear alarm
SRP audio lost Reduce usage, clear alarm
No IP address Configure an IP address
To Next Page
Loading...
