Page 188 of 206 Appendix A: WLAN Application Gateway 2246
553-3001-304 Standard 3.00 September 2004
Certification testing
WLAN Application Gateway 2246 certification
When the WLAN Application Gateway 2246 is properly connected to the
Application Server, LED 1 blinks.
Wireless handset certification
WLAN Application Gateway 2246 installation on new system
If this is a new system installation, continue with WLAN Handset 2210/2211
registration and Call Server programming. When the wireless handset
installation is complete, perform the usual voice and coverage tests.
WLAN Application Gateway 2246 installation on existing system
Follow the steps in Procedure 28 to certify the wireless handsets on an
existing system.
Procedure 28
Certifying the wireless handsets on an existing system
1 Place a test call.
2 Test the features on each WLAN Handset 2210/2211 to ensure the
system is working properly.
3 Test the application on each WLAN Handset 2210/2211.
4 Consult the application provider for specific test procedures.
End of Procedure
Updating software
The WLAN Application Gateway 2246 and the WLAN Handset 2210/2211
use proprietary software programs. The software versions that are running on
the system components can be displayed through the System Status screen.
To Next Page
Loading...
