Appendix A: WLAN Application Gateway 2246 Page 189 of 206
WLAN IP Telephony Installation and Configuration
Nortel Networks provides information about software updates, and how to
obtain the software (for example, downloading from the Nortel Networks
web site).
Software updates on MOG700 systems
After software updates are obtained from Nortel Networks, they must be
transferred to the appropriate location in the LAN. This enables the
corresponding system components to access and update their software. The
FTP (File Transfer Protocol) method of transfer is used.
In the WLAN Application Gateway 2246, the flash file system has the
following files:
The fnctla.bin file is upgraded periodically by Nortel Networks and is the
only file downloaded. The other files are configuration files and their names
are provided for information and backup purposes.
Obtain software using FTP
When using FTP, a host system is used to connect to a remote system. In this
example, the host is the client and the server is the WLAN Application
Gateway 2246. The “put” command means to copy the files from the host to
the remote system.
Note: FTP commands vary with the particular FTP program used. Use
the following steps as a general guide but be aware that an FTP program
may use different terms to describe the procedure.
Table 23
Software files
File name Description
config.bin OAI box configuration
fnctla.bin functional code
oaiptlst.bin phone list configuration
oaipttlsb.bin redundant phone list configuration
To Next Page
Loading...
