Page 174 of 206 Appendix A: WLAN Application Gateway 2246
553-3001-304 Standard 3.00 September 2004
Procedure 22
Connecting to a WLAN Application Gateway 2246 through Telnet
1 Run a Telnet session to the IP address of the WLAN Application
Gateway 2246.
2 Log in to the WLAN Application Gateway 2246.
The NetLink OAI System screen appears.
Note: Since the WLAN Application Gateway 2246 has been initially
configured, the NetLink OAI System screen now has some different
options displayed.
End of Procedure
When the configuration procedure is complete, the NetLink OAI System
screen adds a Feature Programming option. Also, the OAI Line
Configuration option is replaced by a Telephone Line Configuration option.
See Figure 29 on page 175.
To Next Page
Loading...
