Oberheim Matrix-12 - Page 106

if the MATRIX-12 is powered off. To quickly return to a simple VASSIGN/ZONE
configuration, perform the following "Power-Up Clear" procedeure:
1. Turn the MATRIX-12 off.
2. Press and hold the CLEAR button in the MODULATION SOURCE/
X SELECT SECTION.
3. While you are holding CLEAR, turn the MATRIX-12 back on.
4. The displays in the PAGE MODIFIER section of the front panel will read:
RESET MEMORY ? ( DOESNT AFFECT PA TCHES )
YES no
5. Press the YES button and the MATRIX-12 Global parameters will
default to the settings listed on Page 45 and 46.
106 Matrix-12 Owner's Manual