Oberheim Matrix-12 - Page 157

The following table summarizes, for your convenience, the conventional
modulation routings and how they are obtained on the M ATRIX-12:
t Hardwired Pitch Bend of ± 1 Whole Tone is obtained by selecting LEV 1 in PAGE 2
ofVCOl and/or VCO 2.
* This entry in the table is a dual-destination mod. Lever 2 is modulating the Amplitude
of an LFO which is then modulating the Frequency of the VCOfs. Hardwired Vibrato is
obtained by selecting VIB in PAGE 2 of VC01 and/or VCO 2.
Matrix-12 Owner's Manual
157