157
EN
Shooting Settings
4
Conguring High Res Shot
1
Congure options.
• Press FG to select an item and press the Q button to
display the setting menu.
• After conguring options, press the Q button to return
to High Res Shot setting screen.
F+RAW
80M
hK
#
Charge Time
0sec
Waiting Time
0sec
High Res Shot
High Res Shot
On
m
hK
Choose the image quality of High Res Shot shooting (
P. 140
).
Waiting Time
Set how long the camera waits before releasing the shutter after
you press the shutter button fully. Use this to prevent the eect of
camera shake caused by the pressing of the shutter button.
#Charge Time
Choose how long the camera waits for the ash to charge between
shots when using a ash unit not specically designated for use with
the camera.
[0.5 sec] / [0.2 sec] / [0.1 sec] / [0 sec]
Shooting
1
Press the MENU button to close the High Res Shot setting screen and return
to shooting screen.
• A h icon will be displayed. The icon will ash if the
camera is not steady. The icon stops ashing when the
camera is steady and ready to shoot.
• After enabling High Res Shot, check the option selected
for image quality. Image quality can be adjusted in the
super control panel.
1
10231023
P
1
/
250
P
1
/
F
250 5.65.6
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF
60p60p L
-
8L
-
8
S
-
AFS
-
AF
33
1
00
+
-
0
%
0
%
rr
OO
$$
S
-
IS
Off
S
-
IS
Off
ISO
Auto
ISO
Auto
Camera readying for High
Res Shot (ashes)
2
Take pictures.
• Shooting is complete when the green h icon clears from the display.
• The camera will automatically create the composite image when shooting is
complete. A message will be displayed during this process.
• Choose from JPEG (AF, IF, or JF) and RAW+JPEG modes. When image quality
is set to RAW+JPEG, the camera saves a single RAW image (extension “.ORI”) before
combining it with the high resolution shooting. Pre-combination RAW images can be
played back using the latest version of OM Workspace.
# AF and AF+RAW are unavailable when [Onn] (handheld) is selected as the shooting
method.
# [S-IS O] is automatically selected for [KImage Stabilizer] (P. 136) when [Onm] (tripod)
is chosen, [S-IS Auto] when [Onn] (handheld) is selected.
# The maximum wait time for [Onn] (handheld) is 1 second.
# During RC ash photography, the maximum ash wait time is 4 seconds and the ash
control mode is xed at MANUAL.
# The following cannot be used:
multiple exposure, keystone compensation, bracketing, focus stacking, sheye
correction, and HDR.
# When [High Res Shot] is set to [Onm] (tripod), [Time Lapse Movie] becomes [O].
To Next Page
Loading...
Need help?
General
