Olympus OM System OM-1 - Monitor;Sound;Connection Settings; Disabling Touch Controls; Monitor Brightness and Hue

249 EN
Setting Up the Camera
7
Monitor/Sound/Connection Settings
Disabling Touch Controls (Touchscreen Settings)
PASMB
n
Enable or disable touch controls.
Menu
MENU n e n 3. Monitor/Sound/Connection n Touchscreen Settings
O󰀨 Disable touch controls.
On Enable touch controls.
Monitor Brightness and Hue (Monitor Adjust)
PASMB
n
Adjust monitor color temperature and brightness. This option applies in both still
photography and movie modes.
Menu
MENU n e n 3. Monitor/Sound/Connection n Monitor Adjust
j (Color temperature)
Adjust color temperature.
Use the front dial or HI to adjust the “amber–blue” axis.
Moving the pointer (M) closer to A adds a red cast and moving
it closer to B adds a blue cast.
Use the rear dial or FG to adjust the “green–magenta” axis.
Moving the pointer (M) closer to G adds a green cast and
moving it closer to M adds a magenta cast.
k (Brightness)
Adjust brightness. Use FG to choose a setting.
[-7] – [±0] – [+7]
• Press the INFO button to switch between color temperature and brightness and set each
item.
• You can reset the setting by pressing and holding the Q button.
• In B mode, the monitor uses the brightness selected in [Bulb/Time Monitor].
g “Conguring BULB/TIME/COMP Settings (BULB/TIME/COMP Settings)” (P. 173)