49
EN
Shooting
2
Choosing aperture and shutter speed (M: Manual Exposure)
PASM B
n
In this mode, you choose the aperture and shutter speed. You can adjust settings
according to your goals, for example by combining fast shutter speeds with small
apertures (high f/-numbers) for increased depth of eld.
1
Rotate the mode dial to M.
2
Adjust aperture and shutter speed.
• Use the front and rear dials to adjust the following
settings.
Front dial: Aperture
Rear dial: Shutter speed
• Choose from shutter speeds of 1/8000–60 s.
• Shutter speeds as fast as 1/32000 s are available in
silent mode. g
“Shooting without shutter sound
(Silents Settings)” (P. 132)
• The display shows the dierence between the exposure
produced by the selected aperture and shutter speed
and the optimal exposure metered by the camera. The
display will ash if the dierence exceeds ±3 EV.
BKT S
-
OVF
00
+
-
1
10231023
1
/
2501
/
F
250 5.65.6
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF
60p60p L
-
8L
-
8
S
-
AFS
-
AF
33
L
1
4K
0
%
0
%
rr
OO
Dierence from optimal
exposure
• When [Auto] is selected for [K ISO], ISO sensitivity will automatically be adjusted
for optimal exposure at the selected exposure settings. [K ISO] defaults to [Auto].
g “Changing ISO sensitivity (ISO)” (P. 113)
3
Take pictures.
%You can choose the functions performed by the front and rear dials. g “Assigning Roles
to the Front and Rear Dials (KDial Function / nDial Function)” (P. 216)
%You can use the Fn lever to reverse the roles of the front and rear dials. The lever
can also be assigned other roles. g “Customizing the Fn Lever (Fn Lever Settings)”
(P. 219)
%Depending on the shutter speed selected, you may notice banding in the display caused
by icker from uorescent or LED light sources. The camera can be congured to reduce
the eects of icker during live view or when pictures are taken. g “Reducing Flicker
in Photographs (Anti-Flicker Shooting)” (P. 135), “Reducing Flicker Under LED Lighting
(KFlicker Scan / nFlicker Scan)” (P. 108)
%You can choose whether the display reects the eects of exposure compensation or
maintains a constant brightness for ease of viewing. g “Changing the look of the
display (KLV Mode)” (P. 225)