287
EN
Connecting the Camera to External Devices
8
Powering the Camera via USB (USB Power Delivery)
Mobile batteries or USB AC adapters conforming to the USB Power Delivery (USB PD)
standard can be used to power the camera. The devices must:
Standard: Conform to the USB Power Delivery (USB PD) standard
Output: Be rated for an output of 27 W (9 V 3 A, 15 V 2 A, or 15 V 3 A) or more
1
After conrming that the camera is o, use the USB cable to connect it to the
device.
USB connector
Type C
Type CUSB port
Mobile battery or other USB
device
USB cable
• The method used for connection varies from device to device. See the documentation
provided with the device for details.
• You may be unable to use USB Power Delivery (USB PD) with some USB devices.
See the manual supplied with the USB device.
2
Turn the camera on.
• The camera will draw power from the connected USB device.
• If the camera displays a message prompting you to identify the device to which the
USB cable is connected, select [USB PD].
• If the batteries are very low, the display will remain blank when the camera is
connected to the USB device. Be sure the batteries are charged.
• “USBP” is displayed while the camera draws power from the USB device.
To Next Page
Loading...
Need help?
General
