EasyManua.ls Logo

Olympus OM System OM-1 - Disabling the Focus Beep; External Monitor Display Options

Olympus OM System OM-1
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
251
EN
Setting Up the Camera
7
When Monitor is Opened
[Operative]: When [EVF Auto Switch] is [On] and you
put your eye to the viewnder, the display switches to
the viewnder even if the monitor is open.
[Inoperative]: When [EVF Auto Switch] is [On] and
you put your eye to the viewnder, the display does not
switch to the viewnder if the monitor is open.
%The [EVF Auto Switch] setting screen appears when you press and hold the u button.
Disabling the Focus Beep (8)
PASMB
n
Disable the beep that sounds when the camera focuses.
Menu
MENU n e n 3. Monitor/Sound/Connection n 8
On A beep sounds after successful autofocus operations. The beep sounds
only when the camera rst focuses using [C-AF].
O󰀨 A beep does not sound after successful autofocus operations.
%You may need to adjust settings in the [Silents Settings] menu in order to enable the
focus beep during silent shooting (P. 132).
External Monitor Display Options (HDMI Settings)
PASMB
n
Choose the signal output to external monitors connected via HDMI. Adjust the frame
rate, movie frame size, and other settings according to monitor specications.
Menu
MENU n e n 3. Monitor/Sound/Connection n HDMI Settings
Output Size
Choose the type of signal output to the HDMI
connector.
[C4K]: The signal is output in 4K digital cinema (4096
× 2160) format.
[4K]: If possible, the signal is output in 4K (3840 ×
2160).
[1080p]: If possible, the signal is output in Full HD
(1080p).
[720p]: If possible, the signal is output in HD (720p).
Output Frame Rate
Choose the signal frame rate according to whether the
device supports NTSC or PAL.
[60p Priority]: Frame rate for areas supporting NTSC.
[50p Priority]: Frame rate for areas supporting PAL.
# [Output Frame Rate] cannot be changed when the camera is connected to a device via
HDMI.
# Sound will not be played back unless the connected device is compatible with the sound
format.
%You can congure detailed options for when outputting signals to an HDMI device in
movie mode. g “HDMI Output (nHDMI Output)” (P. 182)

Table of Contents

Related product manuals