284
EN
Connecting the Camera to External Devices
8
Uploading Pictures as They Are Taken (0RAW/Control)
PASMB
n
Connect the camera to a computer via USB to upload pictures as they area taken.
You can take pictures using the controls on the camera body or while controlling the
camera remotely from the computer.
1
After conrming that the camera is o, connect it to the computer using the
USB cable.
• When attaching the USB cable, use the supplied cable protector and cable clip to
prevent damage to the connectors. g “Attaching Cable Protectors” (P. 19)
USB port
USB connector
USB cable
• The locations of USB ports vary from computer to computer. See the documentation
provided with the computer for information on USB ports.
• If the USB port on the computer is Type A port, use the optional CB-USB11 cable.
2
Turn the camera on.
• The camera will display a message prompting you to identify the device to which the
USB cable is connected.
%If the message is not displayed, select [Select] for [USB Mode] (P. 252).
# If the batteries are very low, the camera will not display a message when connecting
to a computer. Be sure the batteries are charged.
3
Highlight [0RAW/Control] using FG and
press the Q button.
USB
MTP
0
RAW/Control
USB PD
Storage
Exit
4
Launch the copy of “OM Capture” installed on the computer.
• When prompted to choose the connection type, click
[USB Connection].
[USB Connection]
To Next Page
Loading...
Need help?
General
