48
EN
Shooting
2
Subject Too Dark or Too Bright
If the camera is unable to achieve optimal exposure, the aperture display will ash as
shown.
Display Problem/solution
Low aperture value
20002000 F2.8F2.8
Underexposure.
• Choose a slower shutter speed.
High aperture value
125125 F22F22
Overexposure.
• Choose a faster shutter speed. Shutter speeds as fast as
1/32000 s are available in silent mode.
• If the subject is still overexposed at the higher speed, the
limits of the camera metering system have been exceeded.
Use a third-party ND (Neutral Density) lter to reduce the
amount of light entering the camera.
%When [KISO] is not set to [Auto], optimal exposure may be achieved by changing the
setting. g “Changing ISO sensitivity (ISO)” (P. 113)
%The aperture value shown when the display ashes varies with the lens and focal length.
To Next Page
Loading...
Need help?
General
