Olympus OM System OM-1 - Page 161

161 EN
Shooting Settings
4
3
The display returns to the Focus Stacking setting screen.
 Conguring Focus Stacking
1
Congure options.
• Press FG to select an item and press the Q button to
display the setting menu.
• After conguring options, press the Q button to return
to Focus Stacking setting screen.
MENUMENU OK
5
8
Focus Stacking
Set number of shots
Set focus differential
# Charge Time
On
0sec
Focus Stacking
Set number of
shots
Choose the number of shots to be taken with varied focus positions.
[3] – [15]
Set focus
di󰀨erential
Choose the amount the camera varies focus with each shot.
[1] – [10]
#Charge Time
Choose how long the camera waits for the ash to charge between
shots when using a ash unit not specically designated for use with
the camera.
[0 sec] / [0.1 sec] / [0.2 sec] / [0.5 sec] / [1 sec] / [2 sec] / [4 sec] /
[8 sec] / [15 sec] / [30 sec]
 Shooting
1
Press the MENU button to close the Focus Stacking setting screen and
return to shooting screen.
• W appears on the screen.
• Picture mode will be set to [Natural].
• A frame indicating the nal crop will be shown in the
display. Compose the shot with your subject in the
frame.
1
10231023
P
1 / 250
P
1 / F 250 5.65.6
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF 60p60p L
-
8L
-
8
S
-
AFS
-
AF
33
L
1
4K
F
00
+
-
0.00.0
10
0 %
10
0 %
rr
OO
$$
200200
ISO
Auto
ISO
Auto
W
2
Take pictures.
• The camera will automatically take the selected number of shots when the shutter
button is pressed all the way down.
# When [Focus Stacking] is set to [On], [Flash Mode] in [Silents Settings] (P. 132)
becomes [Allow].
# The ash sync speed is set to 1/100 s. Selecting a value over ISO 16000 for [KISO] sets
the ash sync speed to 1/50 s.
%We recommend using a remote control (P. 279) to reduce blur caused by camera shake.
In [Silents Settings] (P. 132), you can choose how long the camera will wait to release
the shutter after the shutter button is pressed all the way down.