169
EN
Shooting Settings
4
# The ash will not work if the ash charging time is longer than the interval between shots.
# When 1000 or a larger number is selected for [Number of Frames], [Time Lapse Movie]
will be set to [O].
# When [High Res Shot] is set to [Onm] (tripod), [Time Lapse Movie] becomes [O].
# If any of still pictures are not recorded correctly, the time lapse movie will not be
generated.
# If there is insucient space on the card, the time lapse movie will not be recorded.
# If there is not enough charge left on the battery, the shooting may end partway through.
Use a suciently charged battery or connect the supplied USB-AC adapter (P. 17) or a
mobile battery conforming to the USB-PD standard to the camera when shooting.
To Next Page
Loading...
