58
EN
Shooting
2
îš„ Recalling Saved Settings
In modes other than n, you can recall the settings stored in custom modes [C1]
through [C4].
1
Press the MENU button to display the menus.
2
Highlight the _ tab using the front dial.
K
2
K
1
q
G
1
Y
F
4:3
1.
K
K
Basic Settings/Image Quality
Custom Mode
Image Aspect
Image Review
Shading Comp.
Off
Off
K
K
Detailed Settings
3
Highlight [1. Basic Settings/Image Quality] using the
HI buttons or the rear dial.
4
Highlight [Custom Mode] using the FG buttons
and press the Q button.
5
Highlight the desired custom mode ([C1]–[C4])
using FG buttons and press the Q button.
C2
C1
C3
C4
--
--
Set
Set
6
Highlight [Recall] using the FG buttons and press
the Q button.
MENU
OK
Assign
Recall
Save Settings Reset
Set
7
Highlight [Yes] using the HI buttons and press the
Q button.
MENU
OK
Yes
Apply C1 settings? Current camera
settings will be overwritten.
No
8
Press the MENU button to exit the menus.
%When you recall a setting while the mode dial is set to C1, C2, C3, or C4, the shooting
mode also changes to the saved mode.
%Settings recalled by pressing a button to which [C1] - [C4] (Custom Mode C1 - 4) has
been assigned in [KButton Function] (P. 208) cease to apply when you:
- Turn the camera o󰀨
- Rotate the mode dial to another setting
- Press the MENU button during shooting
- Perform a reset
- Save or recall custom settings