60
EN
Shooting
2
Choosing an Exposure Mode (n Mode (Movie Exposure Modes))
PASMB
n
You can create movies that take advantage of the eects available in P, A, S, and M
modes.
1
Press the MENU button to display the menus.
2
Highlight the n tab using the front dial.
3
Highlight [1. Basic Settings/Image Quality] using the HI buttons or the rear
dial.
4
Highlight [nMode] using the FG buttons and press the Q button.
5
Highlight the desired mode using FG buttons and press the Q button.
P
Optimal aperture is set automatically according to the brightness of the subject.
Use the front dial or rear dial to adjust exposure compensation.
A
Depiction of background is changed by setting the aperture.
Use the front dial to adjust exposure compensation and rear dial to adjust aperture.
S
Shutter speed aects how the subject appears. Use the front dial to adjust exposure
compensation and rear dial to adjust shutter speed.
Shutter speed can be set to values between 1/24 s and 1/32000 s.
M
Freely adjust both aperture and shutter speed.
Use the front dial to select aperture value and the rear dial to select shutter speed.
• Choose from shutter speeds of 1/24–1/32000 s. Values of ISO 200–12800 are
available using the [n ISO] manual sensitivity control options.
• The display shows the dierence between the exposure produced by the selected
aperture and shutter speed and the optimal exposure metered by the camera. The
display will ash if the dierence exceeds ±3 EV.
• The option chosen for [bISO-A Upper/Default] (P. 114) takes eect.
%The low end of the shutter speed changes according to the frame rate of the movie record
mode.
6
Press the MENU button to exit the menus.
%[nMode] can also be set from the super control panel. g “The Super Control Panel/LV
Super Control Panel” (P. 69)
To Next Page
Loading...
Need help?
General
