Olympus SLIDEVIEW VS200 User Manual

9 Unboxing
8. Make sure that all handles for transportation are screwed in completely
and tight.
9. Remove all blue tape stripes for the grounding flags as well as the tape that
secures the front door.
10. Remove the tape at the bottom left corner and take out the bubble foil
pocket which contains the cable for the loader connection.
11. Open the door and remove the six desiccant bags.
- 31 -
Instructions for useOLYMPUS VS200 System

Olympus SLIDEVIEW VS200 Specifications

General

Brand	Olympus
Model	SLIDEVIEW VS200
Category	Microscope
Language	English