Olympus SLIDEVIEW VS200 User Manual

6. Push the VS200 loader onto the connector on the VS200 scanner.
7. Tighten the 2 hex screws (size 5 mm) which attach the connector of the
VS200 scanner to the VS200 loader.
8. Remove the remaining handles from the VS200 scanner and the VS200
loader.
9. Reconnect the VS200 system to the power supply.
- 76 -
Instructions for use
15 Verbindung VS200 Scanner und VS200 Loader
OLYMPUS VS200 System

Olympus SLIDEVIEW VS200 Specifications

General

Brand	Olympus
Model	SLIDEVIEW VS200
Category	Microscope
Language	English