Omron 3G3JX

3-16
3-4 Operation Procedure (Example: Factory Default)
3
Operation
("A021" is displayed.)
•"2" of the 2nd digit blinks.
5. Change the 1st digit of the function code.
•"1" of the 1st digit blinks.
•Press the Mode key to start "2" of the 2nd digit
blinking again.
("A029" is displayed.)
•"9" of the 1st digit blinks.
6. The function code selection is complete.
"A029" selection completed.
•Press the Mode key to change the data for
A029.
(Supplemental Information)
•If you enter a parameter number that is not included in the parameter list, the display
returns to the parameter previously displayed.
•Press the Enter key to shift the digit to the right, and the Mode key to shift to the left.
ak0k2k1
Press
ak0k2k1
Press or
(2 times) (8 times)
ak0k2k9
Press
("9" is entered.)
ak0k2k9