Omron 3G3MX2-A2002-EV2 - Page 177

4 Parameter List
4 - 17
Multi-function Compact Inverter 3G3MX2-EV2 User’s Manual (I666-E1)
Parameter
No.
Function name
Monitor or data range
Default
data
Set
data
Changes
during
RUN
Unit
Page
Lock
b031
Soft Lock Selection
00: Data other than b031 cannot be
changed when terminal SFT is ON.
01: Data other than b031 and the set
frequency cannot be changed when
terminal SFT is ON.
02: Data other than b031 cannot be
changed.
03: Data other than b031 and specified
frequency parameter cannot be
changed.
01
Enabled
−
P. 7-54
Auxiliary
function
b033
Motor Cable Length
5. to 20.
10.
Enabled
m
P. 6-4
b034
RUN Time/Power ON
Time Detection Level
0: Disabled (Function does not activate)
1. to 65535.
0.
Enabled
10 h
P. 7-84
b035
RUN Direction Limit
Selection
00: No direction limit
01: Only Forward is enabled (Reverse
is limited)
02: Only Reverse is enabled
(Forward is limited)
00
Disabled
−
P. 7-38
b036
Reduced Voltage
Startup Selection
0: Reduced voltage startup disabled 1
(Reduced voltage startup time: short) to
255 (Reduced voltage startup time:
long)
2
Enabled
−
P. 7-36
b037
Display Selection
00: Complete display
01: Individual display of functions
02: User setting + d001, F001, b037
03: Data comparison display
05: Monitor display + b037
00
Enabled
−
P. 5-3
b038
Initial Screen Selec-
tion
000: Screen on which the Enter key
was last pressed
001 to 060: d001 to d060
201: F001
202: Do not set.
001
Enabled
−
P. 7-56
b039
User Parameter
Automatic Setting
Function
00: Disabled
01: Enabled
00
Enabled
−
P. 7-60
4
4-3 Extended Function Mode
4-3-2 Group b: Detailed Function Parameters