72
CJ1M Functions Arranged by Purpose Section 1-9
Decelerate to a stop during
speed control.
Execute an ACC(888) (continuous) instruc-
tion during a speed control operation
started with SPED(885) (continuous) or
ACC(888) (continuous).
Performed with the Decelerate to Stop Bit.
External
I/O
Origin Input Sig-
nal
A built-in input is used. Input through the Position Control Unit's
input terminal.
Origin Proximity
Input Signal
A built-in input is used. Input through the Position Control Unit's
input terminal.
Positioning Com-
pleted Signal
A built-in input is used. Input through the Position Control Unit's
input terminal.
Error Counter
Reset Output
A built-in output is used. Output through the Position Control Unit's
output terminal.
CW/CCW Limit
Input
A separate Input Unit is used and an Auxil-
iary Area bit is controlled from the program.
Input through the Position Control Unit's
input terminal.
Item CJ1M CJ1W-NC Position Control Unit
To Next Page
Loading...
