551
Specifications of Basic I/O Units Appendix A
• Set the pulse width of signals input to the Interrupt Input Unit so they satisfy the above conditions.
Terminal Connections
Note Terminal numbers A0 to A9 and B0 to B9 are used in this manual, but they are not printed on the Unit.
CJ1W-IDP01 Quick-response Input Unit (16 Points)
Temperature characteristics for simultaneously ON points
16 points at 45
°C.
12 points at 55
°C.
Input voltage: 26.4 V DC
No. of simultaneously ON points
Ambient temperature
A8
0
2
4
6
10
12
14
8
1
3
5
7
COM
11
13
15
9
COM
A0
A1
A2
A3
A4
A5
A6
A7
B8
B7
B6
B5
B4
B3
B2
B1
B0
24 V DC
The polarity can be connected in either direction.
Rated Input Voltage 24 V DC
Rated Input Voltage Range 20.4 to 26.4 V DC
Input Impedance 3.3 kΩ
Input Current 7 mA typical (at 24 V DC)
ON Voltage/ON Current 14.4 V DC min./3 mA min.
OFF Voltage/OFF Current 5 V DC max./1 mA max.
ON Response Time 0.05 ms max.
OFF Response Time 0.5 ms max.
Number of Circuits 16 (16 points/common)
Number of Simultaneously
ON Points
100% simultaneously ON (24 V DC)
Insulation Resistance 20 MΩ between external terminals and GR terminal
(at 100 V DC)
Dielectric Strength 1,000 V AC between external terminals and GR ter-
minal for 1 minute at a leakage current of 10 mA
max.
Internal Current Consumption 5 V DC: 80 mA max.
Weight 110 g max.
Accessories None
To Next Page
Loading...
