572
Specifications of Basic I/O Units Appendix A
Note The maximum load currents will be 2.0 A/common and 4.0 A/Unit if a pressure-welded connector is
used.
Circuit Configuration
ON Response Time 0.1 ms max.
OFF Response Time 0.8 ms max.
Insulation Resistance 20 MΩ between the external terminals and the GR
terminal (100 V DC)
Dielectric Strength 1,000 V AC between the external terminals and the
GR terminal for 1 minute at a leakage current of
10 mA max.
Number of Circuits 32 (16 points/common, 2 circuits)
Internal Current Consumption 5 V DC 140 mA max.
Fuse None
External Power Supply 10.2 to 26.4 V DC, 30 mA min.
Weight 70 g max.
Accessories None
Output
indicator
Internal circuits
to
to
To Next Page
Loading...
